|Type||Ductility Testing Machine|
We manufacture and supply a wide range of Ductility Testing Apparatus to our esteemed clients. In flexible pavement construction, our highly appreciated Ductility Testing Apparatus is chiefly used. The use of bituminous material in the formation of ductile thin film around the aggregates is highly important. Our exclusively designed Ductility Testing Apparatus is highly used to carry out the ductility tests on bituminous material, so as to ensure its efficient use.
The apparatus consists of a Water bath with a th ermostatic heater, and a circulating pump to maintain uniform water temperature. One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch. The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to the carrier moves over a scale graduated from 0 - 1 10 cm x 1 mm fixed on the bath with "0" (zero) of the scale towards the fixed plate side. The rotating shaft has 2 speeds of travel for the bracket, 5 cm/min. and 1 cm/min., selected by a clutch. Water bath inside is aluminum, it is an insulated water bath- Water bath is provided with a drain. A heater with thermos tatic control is fixed inside the water bath. Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath. Complete with three briquette moulds and one base plate, all made of brass.
Operates On :